V1.0
PREPARING THE GENERATOR
The generator requires little preparation for use once out of the box.
However, before attempting to start the generator, be sure it is ready.
1.
Inspect the generator and remove any packaging inside the frame.
2.
Make sure spark plug, muffler, fuel cap and air filter are in place
and secured.
3.
Make sure the spark plug lead is securely connected to the spark
plug, otherwise unintentional sparking can result, causing a fire or
an electric shock.
OPERATIONS
PRE-OPERATION CHECKS
WARNING! Do not start or run the generator in an enclosed
area, even if doors or windows are open. Engine exhaust
contains carbon monoxide, an odourless and colourless
poison gas.
Check the engine's condition before operating to maximize the user's
safety and the service life of the engine. Ensure that the generator is
level and the engine switch is in the OFF position before beginning the
pre-operation checks.
GENERAL CONDITION
1.
Look around and underneath the generator for signs of oil or
gasoline leaks.
2.
Remove any excessive dirt or debris, especially around the muffler
and recoil starter.
3.
Look for signs of damage.
4.
Check that all shields and covers are in place.
5.
Check that all nuts, bolts and screws are tight.
CHECK THE ENGINE
Consult the engine manual for additional details.
Page 9
GASOLINE INVERTER GENERATOR
Assistance available at www.princessauto.com or 1-800-665-8685
8953150