Care & Maintenance - PROPOINT D2300iS Mode D'emploi

8953150
12. Review the instructions provided with the equipment powered by
this engine for precautions and procedures that should be followed
before starting the engine.
LOW OIL SHUTDOWN
The oil alert system is designed to prevent engine damage caused by
an insufficient amount of oil in the crankcase. Before the oil level in the
crankcase can fall below a safe limit, the oil alert system will
automatically stop the engine (the engine switch will remain in the ON
position). The oil alert system should not take the place of checking the
oil level before each use. If the engine stops and will not restart, check
the engine oil level before troubleshooting in other areas.
STARTING THE ENGINE
• Pull the starter handle lightly until you feel resistance, then pull the
starter handle briskly. The engine should turn over and start
running.
Do not allow the starter handle to snap back against the engine.
Instead, return the starter grip gently by hand.
The engine may make a metallic rapping noise (spark knock, ping)
while running under a heavy load. This is normal. Replace the fuel with
premium quality gasoline if the metallic rapping noise continues under
normal load. Contact a qualified mechanic if the pinging continues as
this may indicate existing engine damage.
STOPPING THE ENGINE
Follow the steps for shutting down the generator. This will automatically
shut the engine down.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace
damaged or worn components.. Only use identical replacement
parts when servicing.
Assistance available at www.princessauto.com or 1-800-665-8685
GASOLINE INVERTER GENERATOR V1.0
Page 14