Aerogen Solo Manuel D'utilisation Du Système page 13

6. The Aerogen Pro-X Controller can be battery-operated for portable
applications. The rechargeable battery can power the System for up
to 45 minutes when fully charged. In the case of AC power failure the
controller will automatically switch to battery operation.
7. Use the universal mounting bracket to attach the controller to an IV
pole or bed rail in either a vertical or horizontal orientation (Figure 3).
8. Where a standard equipment mount is available, use the equipment
mount adapter to support the controller (Figure 3).
Vertical
Universal Mounting Bracket
Figure 3. Aerogen Pro-X Controller and universal mounting bracket
configurations
Warnings
• To ensure uninterrupted operation of the Aerogen Solo, secure both the
AC/DC adapter cable and the controller cable so they cannot become
disconnected during treatment. If clips are available on patient circuits,
run the cables through the eyes of the clips. If clips are not available,
ensure that all cables are routed safely.
• The AC/DC adapter is the means of isolating the Aerogen Solo System
from the mains power supply.
• The continuous mode can only be operated from AC power supply.
• Do not over-tighten knob on the universal mounting bracket.
Aerogen® Solo System Instruction Manual
Horizontal
Universal Mounting Bracket
Standard
Equipment Mount
Equipment
Mount Adapter
11