Appendix 1: Emc Tables - Aerogen Solo Manuel D'utilisation Du Système

Appendix 1: EMC Tables

The following tables are provided in accordance with IEC/EN 60601-1-2:
Table 8.
Guidance and manufacturer's declaration – electromagnetic emissions
The Aerogen Solo nebuliser system is intended for use in the electromagnetic
environment specified below. The customer or the user of the Aerogen Solo nebuliser
system should assure that it is used in such an environment.
Emissions test
RF Emissions
Conducted and Radiated
CISPR 11
EN 55011: 2009 + A1: 2010
RF Emissions
Conducted and Radiated
CISPR 11
EN 55011: 2009 + A1: 2010
Harmonic emissions
IEC 61000-3-2
EN 61000-3-2: 2014
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
EN 61000-3-3: 2013
Aerogen® Solo System Instruction Manual
Compliance Electromagnetic Environment -
Guidance
Group 1 The Aerogen Solo nebuliser system uses
RF energy only for its internal function.
Therefore, its RF emissions are very low
and are not likely to cause any interference
in nearby electronic equipment.
Class B The Aerogen Solo nebuliser system is
suitable for use in all establishments,
including domestic establishments and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
Compliant
purposes.
Compliant
41