Positioning Of The Sealing Pieces + Skimmer / Posicionamiento De Las Piezas De Sellado + Skimmer - GRE EVORA Manuel D'instructions

POSITIONING OF THE SEALING PIECES
EN
A
REFILLING FITTING WITH KEY
refilling fitting with key.
Cutting of the liner:
A- From outside of the pool, locate the centre of the nozzle and mark it using a cutter.
B- From inside the pool, mark a small cross on the mark left by the cutter.
C-
the nozzle in the wood.
D-
Assembly of the nozzle:
second flat seal.
ATTENTION: hold the seals so they do not drop between the liner and the wood.
second flat seal, the cork seal and the hole in the wood.
the assembly of the skimmer without water coming out of the nozzle.
Install the filter before continuing with
cutting the liner.
Look for us in our YouTube
channel to help you with
82
the assembly.
B
C
D