Braun Silk-epil Xelle 5570 Mode D'emploi page 7

your skin. Guide it in a slow, contin-
uous movement without pressure
against the hair growth, in the direction
of the switch. As hair can grow in
different directions, it may also be
helpful to guide the appliance in dif-
ferent directions to achieve optimum
results.
The massaging rollers
always be kept in contact with the
skin, allowing the pulsating movements
to stimulate and relax the skin for a
gentler epilation. If you are used to
epilation and look for a faster way
to efficiently remove hair, attach the
EfficiencyPro cap
mum skin contact and ensures an
optimum usage position.
3 Leg epilation
Epilate your legs from the lower leg
in an upward direction. When epilating
behind the knee, keep the leg stretch-
ed out straight.
4 Underarm and bikini line epilation
For this specific application, the under-
8
arm cap has been developed.
Placed on the epilation head
perfectly follows the contours of these
areas, providing a gentle and thorough
epilation.
Please be aware that especially at the
beginning these areas are particularly
sensitive. With repeated usage the
pain sensation will diminish. For more
comfort, ensure that the hair is at the
optimum length of 2–5 mm.
Before epilating, thoroughly clean the
respective area to remove residue
(like deodorant). Then carefully dab
dry with a towel. When epilating the
underarm, keep your arm raised up so
that the skin is stretched and guide the
appliance in different directions.
As skin may be more sensitive directly
after epilation, avoid using irritating
8
A
should
a
. It allows maxi-
2
, it
substances such as deodorants with
alcohol.
5 Facial epilation
With the precision head
your Silk·épil is perfectly suited for
conveniently removing any unwanted
hair from the face or other sensitive
areas.
Prior to epilation, we recommend
cleaning the skin with alcohol to pro-
mote good hygiene.
Cleaning the epilation heads
6 After epilating, unplug the appliance
and clean the epilation head used:
If you have used one of the attach-
A a
ments or
clean it with the brush.
7 To clean the tweezer element, use the
cleaning brush dipped into alcohol.
Clean the tweezers with the brush
from the rear side of the epilation
head while turning the barrel manually.
After cleaning, place your preferred
attachment back on the epilation
head.
Subject to change without notice.
This product conforms to the
European Directives EMC
2004/108/EC and Low Voltage
2006/95/EC.
Please do not dispose of the
product in the household waste
at the end of its useful life.
Disposal can take place at a
Braun Service Centre or at
appropriate collection points provided
in your country.
9
attached,
, first remove it and