Mi-T-M Corporation MH-0042-PM10 Manuel De L'opérateur page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STEP 8
Connect Hose & Regulator to Cylinder
Specifications
You must provide propane gas and propane cylinder. Use a standard 20 lb. propane cylinder only.
Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard
for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA58. Your local library or fire depart-
ment should have this book.
The minimum permissible gas supply pressure of 10 W.C. is required for purpose of input adjust-
ment.
The minimum hourly of 17000 Btu is required input rating for a heater for automatic operation at rat-
ings less than full input rating.
The pressure regulator and hose assembly supplied with the appliance must be used.
The installation must conform with local codes, or in the absence of local codes, with National Fuel
Gas Code, ANSI Z223.1 .
A dented, rusted or damaged propane cylinder may be hazardous and should be checked by your
cylinder supplier. Never use a propane cylinder with a damaged valve connection.
The propane cylinder must be constructed and marked in accordance with the specifications for LP
gas cylinders of the U.S. Department of Transportation (DOT}.
Never connect an unregulated propane cylinder to the heater.
Attach regulator to cylinder.
Complete attachment.
Install cylinder.
16
ASSEMBLY
Propane Patio Heater Manual

Publicité

Table des Matières
loading

Table des Matières