Mi-T-M Corporation MH-0042-PM10 Manuel De L'opérateur page 12

STEP 2
Attach ground fixtures to Base
Option 1: Pre-assembled into base
• Slide 4 Large bolts through holes of Base.
• Slide 4 Large nuts through holes under bucket and tighten screws with phillips screw driver.
• Fill bucket with sand
Option 2: If no water tank, go ahead this step.
Optional ground fixtures (not available with all models) Mount optional ground fixtures with 6 pcs M6 small
bolts and M6 flange nuts into holes on base housing.
12
ASSEMBLY
Propane Patio Heater Manual