Starting A Programme - AEG FAVORIT 99015 VI Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE DETERGENT
A
B
30
20
SETTING AND STARTING A
PROGRAMME

Starting a programme

1. Open the water tap.
2. Press the on/off button to activate
the appliance.
3. Press one of the menu buttons to
go through the programme list and
set a programme.
4. If you want, you can set one or more
options and/or the delay start. Refer
to 'OPTIONS'.
5. Press OK START to confirm.
6. Close the appliance door, the pro-
gramme starts.
• If the delay start is set, the count-
down starts when the appliance
door is closed. When the count-
1.
A
+
-
2.
3.
C
4.
5.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the
appliance continues from the point of
interruption.
Cancelling the delay start while
the countdown operates
1. Press and hold OPTION and OK
CAUTION!
Use only detergents for dish-
washers.
Press the release button (B) to
open the lid (C).
Put the detergent in the compart-
ment (A) .
If the programme has a prewash
phase, put a small quantity of de-
tergent on the inner part of the ap-
pliance door.
If you use detergent tablets, put
the tablet in the compartment (A).
Close the lid. Make sure that the
release button locks into position.
Do not use more than the cor-
rect quantity of detergent. Refer
to the instructions on the deter-
gent packaging.
Detergent tablets do not fully
dissolve with short programmes
and detergent residues can stay
on the dishes.
We recommend that you use
detergent tablets with long pro-
grammes.
down is completed, the pro-
gramme starts.
If you cancel the delay start, also
the set programme is cancelled.
START at the same time until the
display shows the message CON-
FIRM CANCEL? .
ENGLISH
41

Publicité

Table des Matières
loading

Table des Matières