34
4. Press one of the menu buttons to
set the number of hours.
5. Press OK START to confirm.
6. Press OPTION to close the menu
option.
Activating the multitab function
Activate or deactivate the multi-
tab function before the start of a
programme. You cannot acti-
vate or deactivate this function
while a programme operates.
1. Press the on/off button to activate
the appliance.
2. Press OPTION to open the menu
option.
3. Press one of the menu buttons and
go to MULTITAB .
4. Press OK START.
5. Press one of the menu buttons to
activate the multitab function ( ON ).
6. Press OK START to confirm.
7. Press OPTION to close the menu
option.
The function stays on until you
deactivate it. Go to the menu
option and deactivate the multi-
tab function ( OFF ).
If you stop to use the combi
detergent tablets, before you start
to use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Press the on/off button to activate
the appliance.
2. Deactivate the multitab function.
3. Set the water softener to the high-
est level.
4. Make sure that the salt container
and the rinse aid dispenser are full.
5. Start the shortest programme with a
rinsing phase, without detergent
and without dishes.
6. Adjust the water softener to the wa-
ter hardness in your area.
7. Adjust the released quantity of rinse
aid.