Making Conversation; Opening The Gate - Renkforce 1168614 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• For system equipped with several handsets, all the handsets will be alerted with
an incoming call. However, only the handset whose Answer
pressed can initiate conversation with the caller unit. The remaining handsets
will stay in the standby mode and their buttons become de-activated until the
conversation ends, making them impossible to interfere with the conversation.
• Once the call has been answered, the Call indicator (4) on the caller unit remains lit
while the ding-dong tone stops. Conversation can now be made by speaking into the
Microphone (2).
c) Making conversation
The voice transmission is carried out according to the half-duplex principle
(alternating). This means, that you may communicate alternately with each
other, but not simultaneously.
• Conversation is now possible and the voice of the visitor can be heard from the
Speaker (17). To talk back to the visitor, press and hold the PTT
speak towards the Microphone (15). The Reception mode icon (C)
speaking to the visitor. Release the PTT
done and the Reception mode icon (C) goes off. The voice of the visitor cannot be
heard when the PTT
press the Hang up
• This system has an automatic end call feature. In case the resident does not talk back
to the visitor (i.e. press the PTT
ended automatically. Such feature is useful to protect privacy in case you forget to
end the call by pressing the Hang up
• During conversation, the sound volume heard through the speaker (17) can also
be adjusted using the Volume up
volume icon (P)
• Please note the sound volume of the door chime is fixed and cannot be adjusted.
d) Opening the gate
Once a call has been answered, you can use the Doorlock open
remotely open the electric door latch for the visitor (this function is only available if
there is 12 V supply to the caller unit and your door is equipped with an electric latch).
Press the Doorlock open
on the LC display, showing the door latch is opened. The Doorlock opened icon (L)
will disappear after 3 seconds.
button (12) is being pressed. Upon finish of the conversation,
button (14) to end the call.
button (12) ) for over 90 seconds, the call will be
(13) and down
will change accordingly.
button (9) once, the Doorlock opened icon (L)
button (12) when speaking to the visitor is
button (14).
(10) buttons and the Speaker
button (11) is first
button (12) and
goes on when
button (9) to
appears
49

Publicité

Table des Matières
loading

Table des Matières