Intercom - Renkforce 1168614 Notice D'emploi

To avoid misuse by children, this doorlock opening function can be activated or
deactivated. When deactivated, pressing the Doorlock open (9) will have no effect.
Deactivating doorlock opening feature
Under normal operation, press the Volume down
seconds, press the Doorlock open
will show on the LC display.
Activating doorlock opening feature
Repeat the above procedures. The Doorlock de-activated icon (Q)
from the LC display.
c) Intercom
This function is only available when you have two or more handsets. Please note all
units must be paired together.
• In standby mode, press and hold the Answer
can be heard.
• The called handset will display the selected incoming call alert. Press the Answer
button (11) to answer the call. The signal sound (do-do) on the calling handset
will stop.
• The two handsets can converse with each other using the PTT
• Press the Hang up
• The call will also be ended automatically if the PTT
is not pressed for over 90 seconds.
For system with more than two handsets, the incoming call alert on remaining handsets
will stop once the call has been answered. If nobody answers the call, the alert will
stop in 20 seconds.
It is not possible to call a particular handset. Whenever a handset initiates a call, all the
remaining units will be alerted and can answer to the call. However, only the handset
with the Answer
will be excluded from the intercom.
The two handsets under intercom may not be able to detect a call from the
caller unit. It is advisable to keep the intercom conversation short.
button (9). The Doorlock de-activated icon (Q)
button (14) on either handset to end the conversation.
button (11) first pressed can reply to the call. All other handsets
button (10) once, then within 2
button (11), a signal sound (do-do)
button (12).
button (12) on either handset
will disappear
51