Turning The Handset On Or Off; Answering Calls; When A Visitor Calls Upon; Answering The Call - Renkforce 1168614 Notice D'emploi

10. Turning the handset on or off

Press and hold (over 3 seconds) the Power ON/OFF
handset. Press the same button again in case you want to switch it off.

11. Answering calls

a) When a visitor calls upon
• At the caller unit, press the Call
Call indicator (4) starts flashing. Until a handset answers the call, the ding-dong tone
can be heard intermittenly, reminding the visitor to keep waiting. In case there is no
answer after 20 seconds, the caller unit ends the call by itself and the Call indicator
(4) goes off. Press the Call
b) Answering the call
• Upon receiving a call, icon (A)
The handset can answer the call by pressing the Answer
Reception mode icon (C)
48
button (1). A ding-dong tone can be heard and the
button (1) to initiate a call again.
appears on the LC display of the handset.
will show on the LC display.
button (14) to switch on the
button (11) and the