Salter MiBody Instructions Et Garantie

Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
o cerca il tuo prodotto tra le
PÈSE-PERSONNE
BILANÇA PESAPERSONA
PERSONVÅG
ΠΡΟΣΩΠΙΚΗ ΖΥΓΑΡΙΑ
GB
MiBODY Salter MiBody is a range of connected devices to make weight and health
management easier. Measurements are sent wireless to your mobile device and can
be viewed using the free to download MiBody App. Trends can be tracked over time
and the measurements explained with healthy/recommended ranges. The results are
stored on your personal mobile device and are private unless you choose to share
your achievements.
MiBody should be used in addition with and not as a substitute to professional
medical guidance. If you are concerned about any aspect of your health please seek
professional medical guidance.
HOW DOES THIS SALTER SCALE WORK? This Salter Scales shows your current
weight and BMI. It also remembers your previous weight and BMI readings and shows
the difference. This scale stores the personal data of up to 8 users.
NEW FEATURE! This scale features our convenient step-on operation. Once
initialised the scale can be operated by simply stepping straight on the platform – no
more waiting!
PREPARING YOUR SCALE 1. Open the battery compartment on the scale underside.
2. Remove isolating tab from beneath the battery (if fitted) or insert batteries
observing the polarity signs (+ and -) inside the battery compartment. 3. Close
the battery compartment. 4. Select kg, st or lb weight mode by the switch on the
underside of the scale. 5. For use on carpet attach enclosed carpet feet. 6. Position
scale on a firm flat surface.
INITIALISING YOUR SCALE 1. Press the platform centre and remove your foot.
2. '0.0' will be displayed. 3. The scale will switch off and is now ready for use.
This initialisation process must be repeated if the scale is moved.
At all other times step straight on the scale.
MiBODY APP Before using your device for the first time: 1. Download and install
the Salter MiBody App from the App store. Use keyword search terms "Salter" or
"MiBody". 2. Turn Bluetooth "On" in the "Settings" menu of your mobile device.
3. Open the MiBody App and follow the on screen instructions to set up your user
account.
PAIRING DEVICES
1. Turn Bluetooth "On" in the "Settings" menu of your mobile device.
2. Open the MiBody App.
3. Press the button.
migliori offerte di Cura della Persona
E
PERSONAL SCALES
Instructions and Guarantee
PERSONENWAAGE
BADEROMSVEKT
PERSONVÆGT SZEMÉLYMÉRLEG
ПЕРСОНАЛЬНЫЕ ВЕСЫ
BALANZA PERSONAL BILANCIA PESAPERSONA
PERSONENWEEGSCHAAL
OSOBNÍ VÁHA
WAGA ŁAZIENKOWA
4. Press "Add Device".
5. Press the scale to turn on the scale.
6. The App should automatically find the scale. If not, just press the " " to find the
scale.
7. Once found, Select the user number you wish to pair. Touch the OK button to
finish.
8. If pairing is successful, the user number will flash and cycle through the user
details on the scale.
9. If pairing is unsuccessful will be displayed.
10. The scale will automatically switch off.
11. Repeat procedure for each user and each mobile device.
Note: Each user number can only be paired with one mobile device. Results will be
sent to the paired device only.
WEIGHT READING ONLY 1. Step on and stand very still while the scale computes
your weight. 2. Your weight is displayed. 3. Step off. Your weight will be displayed
for a few seconds. 4. The scale will switch off.
AUTO USER DETECTION Auto User Detection allows Weight and BMI readings by
simply stepping straight onto the platform – no more waiting! The scale recognises a
user +/-2.5kg from the previous weight reading.
NOTE: A user number must be set up and previous weight reading taken to use Auto
User Detection.
PERSONAL DATA ENTRY
11. Press the platform centre and remove your foot.
12. Press the button.
13. While the user number is flashing, select a user number by pressing the or
buttons. Press the button to confirm your selection.
14. The male or female symbol will flash. Press or to select male/female, then
press the button.
15. The height (cm/':") mode display will flash.
16. Press button until the correct symbol is flashing, then press the
16. The height display will flash.
16. Press or as necessary to set your height, then press the
17. The age display will flash.
16. Press and as necessary to set your age, then press the
18. The Auto User Detection display will flash A-on/A-off.
19. Press or to select A-on or A-off, then press the
Salter 9088 WH3R
HENKILÖVAA' A T
KİŞİSEL TERAZİ
OSOBNÉ VÁHY
button.
button.
button.
button.
9088