After Installation; Maintenance - Toto Kiwami Renesse TB170DD Manuel D'installation Et D'utilisation

1. Open the water supply line
and check that water flows
out of the spout. If the flow
rate is too low, ensure that
the filter is clean of debris.
2. Check that the direction
of the handle matches
with the position of
escutcheons.
3. Check that no parts are
loose, particularly the set
screws.
In the case of below freezing
temperatures, the water must be
completely drained from faucet.
Please explain this procedure to
customer.
1. Close the shut-off valve of
the water supply line.
2. Let the water run from both
hot and cold side.
3. When completed, put the
handles into CLOSE position.

aFTeR insTaLLaTion

Écusson
Sortie
4

MainTenanCe

Hot Water Side
Open
Hot Water Side
Close
5
Robinet
Écusson
Avant
Cold Water
Side
Open
Cold Water Side
Close