Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
While setting temperature, press up key or down key to select the required temperature (not available in fan or
dehumidifying mode).
While setting time, press up key or down key to select the required time.
5:
Wind Speed Selection Key:
1）In cooling and fan mode, press the key to select high,low wind speed operation. But limited by
anti-cold conditions, under certain conditions, it may not run according to the set wind speed.
2）In dehumidifying mode, pressing the key is invalid, and the fan will forcibly choose low wind speed operation.
6:
Timing Key:
In the case of power on, press the key to close timing; in the case of power off, press the key to open timing.
Press the key, when the timing symbol flashes, press up and down key to select the required timing value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down by one hour.
7:
Sleep Mode:
In the cooling Mode,Press the UP and Fan Key to turn on the sleep mode,then the unit will work on Energy-Saving and
quiet type.
2.operation instructions of remote control
1)
The remote control Panel is as follows:
Instructions of key operation of the high-quality remote control are as follows:
1. Power: Press
the key to turn on or turn off the machine.
2. Mode: press
the key to switch between cooling, air supply, dehumidification mode.
3. Up: press
the key to increase temperature and timing set value.
4. Down: press
the key to reduce temperature and timing set value.
5. Fan: press
the key to select high, medium and low wind speed output circularly.
6. Timer: press
the key to set timing value.
7.Swing: Press
the key to open or close swing style. Air flow of the air outlet can blow at different angles.
8
Publicité
Table des Matières
