Abicor Binzel ABIPLAS WELD 100 W Mode D'emploi page 34

6 Putting into operation
6.2 Attaching the cable assembly to the device
1 Coolant return
Fig. 5
Connecting the torch
EN - 14
Attachment to the device occurs as standard using an ABICOR BINZEL
central connector.
NOTICE
• The pilot current cable and control lead must be equipped with the
appropriate connections for the particular power source type.
2 Coolant supply
1 Join the welding cable plug and socket at the power source and lock them.
2 Connect the pilot current cable to the power source.
3 For manual torches: connect the control lead to the power source.
3 Control lead
®
ABIPLAS WELD
1
2
3
4
4 Pilot current cable
BAL.0092 • 2021-08-20