Designated Use; Personal Protective Equipment (Ppe) - Abicor Binzel ABIPLAS WELD 100 W Mode D'emploi

®
ABIPLAS WELD
1 Identification
1.1 Marking
2 Safety

2.1 Designated use

2.2 Personal protective equipment (PPE)

BAL.0092 • 2021-08-20
®
The ABIPLAS WELD plasma welding torches are used in industry and the
trade sector for inert gas welding using inert gases and gas mixtures containing
active gases. This range can be used for joint welding in all welding positions.
The welding torches are liquid cooled. Their operation requires a power source
with an integrated coolant recirculator or a separate coolant recirculator.
These operating instructions only describe the ABIPLAS
welding torches. The welding torch system must only be operated with original
ABICOR BINZEL spare parts.
This product fulfills the requirements that apply to the market to which it has
been introduced. A corresponding marking has been affixed to the product, if
required.
The attached safety instructions must be observed.
• The device described in these instructions may be used only for the
purpose and in the manner described in these instructions. In doing so,
observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are
not permitted.
To avoid danger to the user, these instructions recommend the use of personal
protective equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory
mask, protective gloves and safety shoes.
1 Identification
®
WELD plasma
EN - 3