Abicor Binzel MB EVO PRO 15 Mode D'emploi page 23

MB EVO PRO/MB EVO
Fig. 4 Equipping the torch neck
4.1.2 PA liner
Fig. 5
Removing the nut
W
NOTICE
• Tightly screw on the nut hand tight using the switch key wrench.
NOTICE
• For PA liners with an outer diameter of 4.00 mm, the capillary tube in the
distance adaptor must be replaced with a guide tube.
Carry out each step in accordance with the figures below:
W
NOTICE
• We recommend that you sharpen the PA liner to an angle of 40° before
assembly using the ABICOR BINZEL sharpener.
4 Putting into operation
A
B
D
A
EN - 9