Abicor Binzel MB EVO PRO 15 Mode D'emploi page 16

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions.
All trademarks mentioned in the operating instructions are the property of their respective owners.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Emergency information
3 Product description
3.1 Technical data
3.2 Signs and symbols used
4 Putting into operation
4.1 Preparing and mounting
the wire guide
4.1.1 Liner
4.1.2 PA liner
4.2 Connecting the cable assembly EN-11
4.3 Setting the shielding gas volume EN-11
4.4 Feeding in the wire
5 Handle operating elements EN-12
5.1 Two-cycle trigger function
EN - 2
EN-3 6
EN-3
7
EN-3
EN-3 8
EN-4 8.1
EN-4 8.2
EN-5 9
EN-5
EN-6
EN-7
EN-7
EN-8
EN-9
EN-12
EN-12
MB EVO PRO/MB EVO
Operation
Putting out of operation
Maintenance and cleaning EN-13
Replacing wear parts
Cleaning the cable assembly
Disposal
EN-13
EN-13
EN-13
EN-15
EN-15