Abicor Binzel MB EVO PRO 15 Mode D'emploi page 29

MB EVO PRO/MB EVO
8.2 Cleaning the cable assembly
Fig. 14 Equipping the torch neck
9 Disposal
WARNING
Risk of injury
Serious injuries can be caused by parts swirling around.
• When cleaning the wire guide with compressed air, wear suitable
protective clothing, in particular safety goggles.
NOTICE
• Replace any damaged, deformed or worn parts.
Carry out each step in accordance with the figures below:
1 Disconnect the cable assembly and lay it out straight.
2 Clean the wire conduit from both sides with compressed air.
3 Mount all parts in the reverse sequence.
NOTICE
• Do not dispose of the device with household waste.
• For disposal, observe the local regulations, laws, provisions, standards
and guidelines.
A
D
E
B
9 Disposal
C
EN - 15