Deployment System; Accessories; Operation; General - Siemens TK76K573 Mode D'emploi

Deployment system

The appliance can be pulled out of the built-
in unit automatically. To do this,
► press (6) (appliance must be
switched on for this) or
► remove grate and pull on the handle
underneath which is now accessible:
The appliance now moves automatically
into deployment position 1. In this position
it can be filled with water, coffee beans,
ground coffee and cleaning / descaling
tablets, and the accessories on the right of
the appliance can be removed.
To pull the appliance out fully,
► press (6) again and pull the appli-
ance out by hand into position 2 or
► pull the appliance out fully by the
handle.
In deployment position 2 the brewing unit
can be removed and the grinding unit
adjusted.
Deployment
position 1
Then push the appliance back fully into the
built-in unit.
During the brewing process,
automatic deployment is
prevented.
Deployment
position 2

Accessories

The fully automatic espresso machine has
special compartments for storing the acces-
sories and quick reference guide (21) with
the appliance. These are located on the
right side (13, 14) and are accessible when
the appliance is pulled out into deployment
position 1.

Operation

General

Fill the water tank with fresh, uncarbonated
water only, and preferably use only beans
for fully automatic coffee and espresso ma-
chines. Do not use coffee beans that have
been glazed, caramelised or treated with
other additives containing sugar, since they
will block the brewing unit.
If the appliance is being used for the first
time or has not been operated for a long
period, the first cup of coffee will not have
the full aroma. When using the espresso
machine for the first time, you will achieve a
suitably thick and stable "crema" only after
the first few cups have been dispensed.
The factory settings of the fully automatic
espresso machine are programmed for op-
timal performance. The appliance switches
off automatically after one hour. This set-
ting, like many others, can be changed (see
"Auto off after" under "Displaying settings").
Important:
Only use the appliance in frost-
free rooms. If the appliance has
been transported or stored at tem-
peratures below 0 °C, wait at least
3 hours before operation.
en de
37