Display Messages - Siemens TK76K573 Mode D'emploi

de en
► Rotary knob
select and change settings in the dis-
play (e.g. coffee strength or per-cup
quantity).
► Display (5): The display uses symbols
and texts to indicate settings, ongoing
processes and messages.
► Use (6) to deploy the appliance
automatically out of the built-in unit (see
"Deployment system").
► i (7): If you press
tion is shown on the display (see "Dis-
playing information"). If you keep
(7) pressed for longer than 3 seconds,
you open the settings menu (see "Dis-
playing settings").
► Press start stop (8) to start
drink preparation or to start a service
programme.
Press start stop (8) again during
drink preparation to stop the dispensing
process.

Display messages

The display shows not only the current
operating status, but also various mes-
sages that give you status information or
let you know when you need to take action.
As soon as you have taken the necessary
action, the message disappears and the
menu for drink selection is displayed again.
Information:
Display message Meaning
Water tank
almost empty
Bean container
almost empty
Please wait...
Drink is ready.
36
(4): This is turned to
i (7), informa-
Water tank must be
refilled soon
Bean container must
be refilled soon
Appliance is working;
please wait a moment
You can now remove
your drink
Prompts:
Display message What you need to do
Refill water
tank
Replace water
tank
Check water
tank
Replace drip
tray
Empty drip tray
i
Refill bean
container
Set up milk
frother
Replace brewing
unit
Close door
Clean
brewing unit
Service -
change filter
Service -
descale
Service -
clean
Service -
Calc'n'Clean
Short rinse
for milk system
» Start
Refill water tank
Replace water tank
Remove water tank
and replace correctly
Replace drip tray
Empty drip tray and
clean
Refill bean container
Set up milk frother
Replace brewing unit
and close door
Clean brewing unit
Change water filter
Run "Descaling"
service programme
Run "Cleaning"
service programme
Run "Calc'n'Clean"
service programme
Rinse milk system