Nintendo WiiFit Mode D'emploi page 5

Point to the Disc Channel (shown in the
2
red box) on the Wii Menu and press
If you install the Wii Fit Channel
(shown in the green box) on the Wii
Menu in Settings (see page 10), you
can do the Body Test and check
the progress of your training without
having to insert the Game Disc.
For more information on the Wii Fit
Channel, see pages 5 or 1.
The Channel Preview Screen will display.
3
Point to Start and press
Channel Preview Screen
The Strap Usage screen will be
4
displayed. Once you are ready, press
The first time you play Wii Fit, you will
have to create save data and register
the Wii Balance Board (see steps 5-9).
On the Wii Fit save-data creation
5
screen, press . Once save data has
been created, a confirmation screen will
appear. Press .
Save-Data Creation Screen
SYSTEM MENU UPDATE
Please note that when first loading the
Game Disc into the Wii console, the Wii will
check if you have the latest system menu,
and if necessary a Wii system update
screen will appear. Press OK to proceed.

.
Wii Fit Channel
.
.
You will need to register your Wii Balance
6
Board to your Wii. Start by opening the SD
Card Slot cover on the Wii system. Also remove
the cover from the battery compartment on the
Wii Balance Board.
When removing the cover from the battery
compartment of the Wii Balance Board, be
careful not to drop the balance board or pinch
your fingers.
Please make sure that the batteries are
properly inserted in the Wii Balance Board.
Press on the Wii Balance Board. The
7
power light will flash. Please do not press
on the balance board when the light is flashing .
Press on the Wii system while the power
8
light on the Wii Balance Board is flashing.
Please do not press for more than 10
seconds. This will cause all of the Wii Remotes
that are registered to that Wii system to
become unregistered.
When the Wii Balance Board is registered to your Wii system, the
9
power light on the balance board will stay on. Please return the cover
on the Wii system SD Card Slot and battery compartment on the Wii
Balance Board to their original positions.
Only one Wii Balance Board can be registered to a single Wii system,
and a maximum of 10 balance board and Wii Remote combinations can
be registered. If an 11th unit is registered, the oldest Wii Remote data will
be erased. However, the Wii Balance Board data will not be erased.
Only one Wii system can be registered with a Wii Balance Board. If a
Wii Balance Board already registered to a Wii system is registered to
another Wii system, it must be re-registered to the first Wii system in
order to be used again.
The Wii Balance Board will be registered as Player .
If a Wii Remote is registered as Player , then that registration will
be erased.