- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the
xreceiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the device.
• The term "IC:" before the device certification number only signifies that the
Industry Canada technical specifications were met
Installation
• The control keypad is for indoor use only.
• Installation in rooms with a high level of humidity and with hidden wiring must
comply with relevant regulations (contact a qualified electrician if necessary).
• Before fixing the control keypad to the wall, verify that it can operate the prod-
uct in question from the proposed position.
• The control keypad should be fixed at a position where the product to be oper-
ated is within sight.
Product
• The control keypad has a built-in RF (radio frequency) unit and will not be oper-
ative if placed in a metal cabinet.
• Electrical products must be disposed of in conformity with all local codes,
ordinances, rules and regulations for electronic waste and not with household
waste.
• Used batteries have to be disposed of in conformity with the relevant environ-
mental regulations and ordinances.
• The packaging can be disposed of with usual household waste.
• Radio frequency band: 2.4 GHz.
• Radio frequency range: 110 yards (100 m) free field. Depending on building
construction, the indoor range is approx 30 ft (10 m). However, constructions
with reinforced concrete, metal ceilings and plaster walls with steel members
may reduce the range.
maintenance and service
• The product requires a minimal amount of maintenance. The surface may be
cleaned with a soft, damp cloth using a small amout of household cleaner diluted
in water.
• If you have any technical questions, please contact your local VELUX sales
company.
VELUX 7