Velux KLI 110 Instructions page 32

1
KEy
min 5 sec
ENGLISH: Changing security key
The security key of the system must be changed if security may have
been compromised, eg if a remote control is missing. The security key is
changed in one control keypad only and then transferred to the remain-
ing keypads/remote controls in the system:
Press KEY button in one control keypad KLI 110 for at least 5
1
seconds to change security key. LED flashes red and green quickly.
When security key has been changed, LED is green for 4 seconds.
If change of security key failed, LED is red for 4 seconds.
Press KEY button in the same keypad for 3-4 seconds to transmit
2
new security key. LED flashes green slowly.
Other control keypads KLI 110 in the system: Press KEY button for
3
max 2 seconds to receive new security key in the keypad. Recep-
tion can take up to 2 minutes. LED flashes green slowly for a few
seconds.
Repeat items 2 and 3 for each of the remaining keypads/remote con-
trols in the system to transfer the new security key.
Note: If the system includes remote control(s) KLR 100, receive new
security key in the remote control as described in the user manual for
KLR 100.
When security key has been transferred, LED is green for 4 seconds.
If transfer of security key has failed, LED is red for 4 seconds.
32 VELUX
2
KEy
3-4 sec