SEFRAM 3516BF Manuel D'utilisation page 59

Use Arrow keys to select the following icons.
You can operate the A-SAVE mode to automati-
cally save new reading. When you use the probes
to measure a new reading, the meter will automati-
cally save it. In some case, the A-SAVE mode will
A-SAVE
not work. For example, the reading is smaller than
(Auto-Save)
the A-SAVE limit , or the reading is OL.
Press OK button to enter/exit A-Save mode.
Press RANGE button to display the recorded data
amount /currently measured value.
Press OK button to enter SAVE mode.
Press OK button to save a new reading to
memory.
SAVE Press RANGE button to display the recorded data
amount /currently measured value.
Press OK button for more than 2sec to exit the
mode.
Press OK button to enter/exit LOAD mode.
Press LEFT or RIGHT button to select data.
LOAD
Press RANGE button to select data index/
recorded value.
Press OK button to enter CLR mode.
Press OK button to delete all data in memory.
CLR
Press OK button for more than 2sec to exit this
mode.
MMA mode is only valid when A-Save mode has
executed and finished.
Press OK button to enter MMA mode.
MMA
Press OK button to display the maximum/
(MAX/MIN)
minimum value .
Press OK button for more than 2sec to exit this
mode.
To exit MEM mode, use Arrow keys to select MEM icon and
press OK button.
A-Save limit.
Function
V, A, W, Flex A, Cap
Hz
Limit
5% of range
10% of 100Hz range
5% of 1k/10k Hz range
M35X6BF-M-00
24