SEFRAM 3516BF Manuel D'utilisation page 54

OHM Measurment
 CAUTION
To avoid possible damage to the Meter or to the equipment
under test, disconnect circuit power and discharge all high -
voltage capacitors before measuring resistance and diode.
Note :
- Press MODE button to enter the "Ω", """ or "$" mode.
- Press MODE button for more than 2sec to return to the
AUTO SENSE mode.
- The red LED will turn on, if the resistance of DUT is < 30Ω.
- Under diode mode, LCD displays "bad" when measuring
a diode conducted at forward and reverse bias.
M35X6BF-M-00
19