Installing A Hard Drive - Dell OptiPlex SX280 Serie Guide De Référence Rapide

Connecting Two Monitors
Use the adapter cable to connect both a VGA monitor and a DVI monitor to the white DVI display-
connector on the computer back panel.

Installing a Hard Drive

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1
If you are installing a new drive, attach the drive rails—located inside the cover—to the new
drive.
2
Attach the data and power cables to the hard drive connectors, being careful not to bend any
of the pins.
3
Slide the hard drive into the bracket.
Connecting the AC Adapter
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1
Connect the power adapter to the connector on the back of the computer. In order for the
connection to be secure, verify that the latch engages completely. (An audible click will be
heard or felt.)
2
Connect a power cable to the
power adapter.
3
If your computer power-cable
connector has a grounding wire,
and you decide to connect it,
continue with step 4. If you decide
otherwise, go to step 5.
Quick Reference Guide
15