afx light GREEN-100 Manuel D'utilisation page 2

 Do not use the unit if the mains lead is damaged. A damaged mains lead must be immediately
replaced by a qualified electrician. Do not try to replace the mains lead yourself.
DMX512
1. Install the units in a suitable position (laying or appending).
2. Use standard XLR microphone cable chain your units together via the XLR connector on the rear of
the units. For longer cable runs we suggest a terminator at the last fixture.
3. Assign a DMX address to each the unit.
4. Turn on all units' power, the units begins reset, then the unit begins working.
5. Use DMX console to control your units.
DESCRIPTION
6) DIP SWITCH
Dip switch are used to select the operating mode (DIP
switch 10) and to set the DMX address (DIP
switch 1 to 9)
When DIP switch 10 is in ON position, the
-
operating mode is DMX. Use DIP switch 1 to 9 to
set the address
Some examples of DMX address setup:
©Copyright Lotronic 2014 GREEN-100
1) AC POWER INPUT / OUTPUT
Connect on this AC power input your AC cord
and use the AC power output to link several
GREEN-100
2) DMX INPUT / OUTPUT
Connect on the DMX input your DMX
controler and use DMX output to link several
DMX devices
3) MUSIC LED
This led give you an information about sound
control. It light when mic detect sound
4) MIC
The mic is used to control laser projector in
sound operating mode
5) MIC SENSITIVITY CONTROL
This control is used to adjust sensitivity of
mic when you use GREEN-100 in sound
mode
When DIP switch 10 is in OFF position, use DIP switch 1, 8 and 9 to select operating mode
-
between sound mode, auto modes
-
DMX Channel functions:
Channel
Ch1 Working mode
Ch2 Pattern
Ch3 Rotation
Pattern horizontal
Ch4
rotation
Pattern vertical rotation
Ch5
Ch6 Pattern horizontal move
Ch7 Pattern vertical move
Pattern
Ch8
size
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask
your local authorities or your dealer about the way to proceed.
DMX-512 Value Function
0~63 Black-out
64~127 Pattern control
128~191 Auto mode
192~255 Music active mode
0~255 Select 1-25 patterns
0~127 Rotate angle
128~191 Rotate speed
192~255 Reverse rotation speed
0~127 X rotation position
128~255 X rotation speed
0~127 Y rotation position
128~255 Y rotation speed
0~127 Pan position
128~255 Pan move speed
0~127 Tilt position
128~255 Tilt move speed
0~63 Static size
64~127 Enlarge speed from fast to
slow
128~191 Zoom speed from slow to
fast
192~255 Zoom speed from slow to
fast
2