Tone Settings (On The Driver Board In The Upper Part); Accessories; Maintenance, Service, Repairs; Decommissioning, Dismantling And Disposal - Pfannenberg PY L-S-TL Serie Instructions De Service

en
6.4

Tone settings (on the driver board in the upper part)

The desired tone can be selected using the tone selector switch S3 (on the driver board in the upper part). The
possible tones are described in the tone type table in the Annex.
The tone is generated after the supply voltage is applied.
DC version
S3
7.

Accessories

Item No.
28300000002
28912000000
8.

Maintenance, service, repairs

➢ Observe the
Safety information
The device requires no special maintenance.
➢ Carry out external cleaning using a weak soap solution without using any solvents.
➢ Only replace components using original spare parts.
➢ Only have repairs carried out at the manufacturer's premises.
Conversions, modifications, improper and impermissible use as well as failure to observe the notes in these
operating instructions shall void any warranty.
9.

Decommissioning, dismantling and disposal

➢ Observe the
Safety information
➢ Only properly qualified personnel should dispose of old devices in accordance with applicable environ-
mental regulations.
Old devices are also professionally disposed of by Pfannenberg. Delivery to one of our manufacturing fa-
cilities shall be free of charge.
Pfannenberg GmbH
Werner-Witt-Straße 1 · D- 21035 Hamburg
Tel.: +49/ (0)40/ 734 12-0
Fax: +49/ (0)40/ 734 12-101
service@pfannenberg.com
http://www.pfannenberg.com
06/2021
Operating instructions PY L-S-TL/ PY L-S-TLA
Volume control
Tone selector switch S3
Designation
Sealing plug, 4-pack
Spare locking bolt, 4-pack
during all work on the device.
during all work on the device.
Page 7 /7
AC version
S3
086200016d