Table des Matières
Publicité
Learning to use your telephone
All manuals and user guides at all-guides.com
3
15
5
7
8
9
16
10
11
1)
Telephone labeling strip
2)
Conference and two-touch memory
(
)
key
*
3)
Call waiting and two-touch memory key
(
)
*
4)
Follow-me
and
(
)
key
*
5)
Disconnect and two-touch memory key
(
)
*
6)
Mailbox
and
(
)
key
*
7)
Operator
and
key
8)
One-touch
and two-touch memory
key
9)
REDIAL key
10) MEM key
11) FLASH key
12) PROG / PAUSE key
13) MUTE key
14) Numeric keypad
15) Handset support
16) Wall mounting slot
(
)
depends on
whether
*
provides this service
two-touch
memory
two–touch
memory
two-touch
memory
your
local operator
Installation
1
2
4
6
8
13
12
14
Handset cord
Connect the long end of the handset cord
to the socket marked with the
(position 17). Insert the cord into the cable
duct (position 20) and attach the short end
to the handset.
Line cord
Connect the line cord to the socket marked
with the
cord into the cable duct (position 21), from
above or below depending on where your
telephone connection is. Attach the other
end to the telephone jack (RJ11).
Wall-mount installation
The telephone can be mounted on a wall
using the two holes on the underside of the
telephone (position 19). Drill the holes with
a 6 mm drill bit, using the template (
indicates the hole positions) provided on
page 54 of this manual (dowels and screws
are not included). Use a screwdriver to
snap out the handset clip (position 22), as
shown in detail A and insert it into the wall
mounting slot (position 16), as shown in
detail B.
1
22
19
17
21
symbol (position 18). Insert the
20
18
symbol
Publicité
Table des Matières
