English - HEINE LoupeLight 2 Mode D'emploi

HEINE LoupeLight 2
®
HEINE MicroLight 2
®
Please read and follow these instructions for use of and keep them for future
reference. (Background: blue, foreground: white.)
Intended Use
HEINE headlights are battery-operated devices intended to be worn on the users head
to provide a secondary light source to aid visualization during surgical, diagnostic,
or therapeutic procedures. It should only be operated by trained medical staff within
a professional health facility.
For U.S. only:
Federal law restricts this device to sale by or on the order of a Physician or
Practitioner.
Warnings and Safety Information
CAUTION! Indicates potential hazardous situations. Ignoring the corresponding
instructions may lead to dangerous situations of mild to moderate extent.
(Background color yellow; foreground color black).
NOTE! Note indicates valuable advice in terms of installation, operation,
maintenance or repair. Notes are important, but not related to hazardous situations.
Setting up
Only operate the LoupeLight 2 and the MicroLight 2 with the HEINE
Ensure safe cable routing (see Figs. 1 and 2). Connect the cable to the lamp housing by
firmly tightening the coupling nut on the cable end to the counterpart on the lamp housing.
Exposure to high mechanical strains and kinking of electrical cables on the headlights
must be prevented.
Fig. 1 Safe cable routing S-Frame
1
2
MED 113729
Fig. 2 Safe cable routing headband
Lightweight
Adjustment of the headband Lightweight
(see Fig. 3): To adjust the head size, the
headband can be widened by pressing the
lever (1) and tightened by pulling at the
free end (2).
Fig. 3 Headband Lightweight
2020-06-02

ENGLISH

mPack mini.
®
7/52