English - HEINE iC2 Mode D'emploi

HEINE iC2 Funduscope
®
Please read and follow these instructions for use of and keep them for future reference.
Intended Use
The HEINE iC2 Funduscope is a hand-held, non-invasive, internally powered digital ophthalmoscope,
®
which is intended for recording, saving and displaying pictures of the internal part of the eye, in particular
the ocular media and the ocular background.
The device is intended for transient application. It should only be operated by qualified medical personnel
within a professional health facility.
For U.S. only:
Federal law restricts this device to sale by or on the order of a Physician or Practitioner!
Warnings and Safety Information
CAUTION! This symbol indicates potential hazardous situations. Ignoring the corresponding
instructions may lead to dangerous situations of mild to moderate extent. (Background color yellow;
foreground color black).
NOTE! This symbol indicates valuable advice in terms of installation, operation, maintenance or repair.
Notes are important, but not related to hazardous situations.
Product overview
1 Controller for adjusting the dioptre compensation
2 Double-stage release button for switch
on the device and for picture recording
3 Micro USB-port
4 Charger indicator
5 Data matrix code and serial number
of the device
6 Mounting case for the smartphone
7 Protective cover
Setting up
Installation of the app
Install the iC2 app on your smartphone. The app is available in the AppStore.
To avoid any possible malfunctions, please use the smartphone without SIM-card.
Choose a mounting case, which is suitable for the used smartphone. Insert the smartphone into the
appropriate mounting case so it is firmly seated. Make sure that the camera is in the correct position.
Setting up of the connection between the iC2 and the smartphone
The connection between the iC2 and the smartphone is possible, using the data matrix code or the choice
of the available devices in the list.
- Start the iC2 App on your smartphone
- Switch on the iC2, using the release button (second pressure point)
- The description of the further steps for the connecting the smartphone with the iC2 is included in the app.
- The connection is via Bluetooth
Connecting the mounting case with the iC2
Insert the guide pins, attached to the mounting case, into the guide rails of the iC2 so it is firmly seated.
Make sure that the mounting case is securely attached to the iC2.
wireless technology
®
MED 113539
1 2
7
2017-12-15

ENGLISH

6
5
4
3
7/52