VALBERG CNF 493 E X180C Consignes D'utilisation page 16

Masquer les pouces Voir aussi pour CNF 493 E X180C:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

C
Useful information
• Although this appliance automatically defrosts, a layer of
frost may occur on the freezer compartment's interior walls
if the freezer door is opened frequently or kept open too
long.lf the frost is too thick, choose a time when the freezer
is nearly empty and proceed as follow:
1 .Remove existing food and accessories baskets,unplug the
appliance from the mains power and leave the doors open.
Ventilate the room thoroughly to accelerate the process.
2. When defrosting is completed,clean your freezer as
described above.
CAUTION:
Don't use sharp objects to remove frost from the freezer
compartment. Only after the interior is completely dry
should the appliance be switched back on and plugged
back into the mains socket.
28
EN
C
Useful information
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks
can cause seals to stick to the cabinet and tear when you
open the door.Wash seal with a mild detergent and warm
water. Rinse and dry it thoroughly after cleaning.
CAUTION:
Only after the door seals are completely dry should the
appliance be powered on.
Replacing the LED light:
The LED light should be replaced by a competent person. If
the LED light is damaged, contact the customer helpline for
assistance.To replace the LED light, the below steps can be
followed:
1. Unplug your appliance.
2. Remove light cover by pushing up and out.
3. Hold the LED cover with one hand and pull it with the other
hand while pressing the connector latch.
4. Replace LED light and snap it correctly in place.
29
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

972960

Table des Matières