Table des Matières
Publicité
ENGLISH
BATTERY OPERATED HYDRAULIC CRIMPING TOOL
B131LN-C ; B131LN-CA ; B131LN-C-KV ; B131LN-CA-KV
IMPORTANT INFORMATION FOR WORKING IN THE
PROXIMITY OF ENERGISED CONDUCTORS
– C
KV
Cembre
ERTAIN
VERSIONS OF
COATINGS TO PROTECT THE OPERATOR AND TOOL AGAINST ACCIDENTAL BRUSH
CONTACT WITH ENERGISED CONDUCTORS
– P
ROPER TRAINING TECHNIQUES AND PRACTICES SHOULD ALWAYS BE ADHERED TO
WHEN WORKING AROUND ENERGISED CONDUCTORS
– A
LWAYS CONSULT YOUR COMPANY
,
SUITABLE TOOLING
RUBBER INSULATED GLOVES
.
TIVE EQUIPMENT
– U
NDER NO CIRCUMSTANCES SHOULD OPERATIVES RELY SOLELY ON THE INSULATING
PROPERTIES OF THE TOOLS ALONE WHEN WORKING AROUND ENERGISED CONDUCTORS
– P
RIOR TO USE PLEASE ENSURE THE TOOL AND SPECIFICALLY THE INSULATING
PROTECTION HAVE NOT BE DAMAGED
This hydraulic tool is powered by a 14.4V battery. The tool is quiet in operation with minimal
vibration, balanced for optimum control, with lightweight construction enabling it to be held
in one hand while positioning the connector with the other.
Operating and release buttons are integrated one in the other and mechanically interlocked
to prevent accidental operation.
Microprocessor control automatically stops the motor at the end of the crimp cycle, saving
energy and extending the life of the battery, whose residual energy level is automatically
displayed after each operation.
The part references "B131LN-C, B131LN-CA, B131LN-C-KV, B131LN-CA-KV" include
the following:
– Basic tool complete with battery and shoulder strap.
– Spare battery.
– Battery charger.
– Plastic carrying case "VAL P19".
TOOLS ARE PROVIDED WITH ADDITIONAL
.
.
'
S WORK RULES AND METHODS TO SELECT
,
SHROUDING AND OTHER PROTEC
.
-
.
3
36
18
19
20
21
22
23
24
25
26
28
Publicité
Table des Matières
