Shelf Instructions - Danby Silhouette DWBC14BLS Guide D'utilisateur

SHELF
INSTRUCTIONS
To remove the shelves:
1) Grasp the top wooden area of the shelf with your hand.
2) While grasping the shelf, gently apply upward pressure to the back of the shelfand downward pressure to
the front of the shelf.
3) Begin to slowly pull the shelf outward until it unhooks from the stoppers, and then remove the shelf
fromthe cabinet.
To re-install the shelves (Fig. G) :
1) Slide in a shelf beneath the track that is directly above the track you want the shelf to rest on.
2) Once the back-end of the shelf is in contact with the back wall of the cabinet, lower the shelf onto the track.
MOVING &
VACATIONS
If you move:
1) Remove or securely fasten down all loose items inside the wine and beverage center.
2) To avoid damaging the leveling screws, turn them all the way into the base.
Vacation Time:
For short vacation periods, leave the controls at their usual settings. During longer absences;
1) Remove all bottles and cans from the appliance.
2) Disconnect from electrical outlet.
3) Clean the wine and beverage center thoroughly.
4) Leave the doors open to avoid the formation of condensate, mold, or odors.
OPERATING INSTRUCTIONS (cont'd)
IMPORTANT: DO NOT cover shelves with aluminum foil or any other material that
will prevent adequate air circulation within the cabinet.
Fig. G
6