Setting The Temperature - Danby Silhouette DWBC14BLS Guide D'utilisateur

OPERATING
THE CONTROLS
1 2
LIGHT
POWER
1) Power ON/OFF switch.
2) Interior lights ON/OFF switch(while the
door stays closed)
3) Run: Indicator light illuminates to signify
that the cooling mode is currently in operation
4) Upper chamber display: Display screen
shows current cabinet temperature and set
temperature of the upper zone.
5) Lower champer display: Display screen
shows current cabinet temperature and set
temperature of the lower zone.
SETTING THE
TEMPERATURE
• To switch the display between the Fahrenheit (°F) and Celsius (°C) scale, depress the 'Set Upper' and 'Set
Lower' control buttons simultaneously for approximately five (5) seconds.
• The temperature range can be set as low as 39°F (4°C) or as high as 64°F (18°C) to suit your specific
beverage requirements. Each depression of the 'Set Upper' or 'Set Lower' button will allow you to adjust the
temperature in 1° increments within the aforementioned range.
• You may view your 'set' temperature at any time by briefly depressing either the 'Set Upper' or 'Set Lower'
button. The set temperature will flash in the display area for 5 seconds before the display resumes showing the
current cabinet temperature.
STORAGE
OPERATING INSTRUCTIONS (cont'd)
4
3
RUN
Activation
In the event of a power failure, wait 3 to 5 minutes before restarting
5
Upper chamber
Lower chamber
6) °C/°F: Adjacent indicator light denotes
which scale of temperature is displayed.
7) 'Set Upper' button: Used to set the
temperature in the upper zone (see 'Setting
the Temperature' below).
'Set Lower' button: Used to set the
temperature in the lower zone (see 'Setting
the Temperature' below).
5
7
6
Set Upper
REGLER SUPÉRIEURE
Set Lower
REGLER INFÉRIEURE