Connections; Connecting The Fm And Am Antennas - JVC TH-C60 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connections

Connecting the FM and AM
antennas
7 AM loop antenna
Setting up supplied AM loop antenna
If the antenna cord is covered with the insulation
coat, twist and pull the insulation coat off and
remove.
Connecting AM loop antenna
1
Center unit
2
3
• Turn the loop antenna until you have the best reception during
AM broadcast program reception.
NOTE
• Make sure the antenna conductors do not touch any other terminals,
connecting cords or power cords. This could cause poor reception.
Do not connect the power cord until all other connections have been made.
Antenna cord
If reception is poor
AM loop antenna
Outdoor single vinyl-covered wire antenna
(not supplied)
7 FM antenna
Center unit
Extend the supplied FM antenna
horizontally.
If reception is poor
Center unit
Outdoor FM antenna (not
Standard type (75 Ω
Outdoor FM antenna cord (not
coaxial) connector
NOTE
• We recommend that you use coaxial cable for the FM antenna as it is
well-shielded against interference.
Center unit
FM antenna (supplied)
supplied)
supplied)
8

Publicité

Table des Matières
loading

Table des Matières