Dual Input (Mains And Bypass) - Tripp-Lite SmartOnline S3M10K1B Manuel De L'utilisateur

3. Installation and Wiring
3.13 Dual Input (Mains and Bypass) Connections
M/1R PRIMARY (Mains) INPUT CONNECTION
B/2R SECONDARY- BYPASS (Bps) INPUT
Mains-L1: Primary input Phase L1
Mains-L2: Primary input Phase L2
Mains-L3: Primary input Phase L3
Input-N: Input Neutral for primary and secondary input
Bps-L1: Secondary input Phase L1
Bps-L2: Secondary input Phase L2
Bps-L3: Secondary input Phase L3
WARNING: In the case of dual input operation, ensure the shorting jumper between each input line has
been removed. The AC input and the AC bypass supplies must be referenced to the same neutral point.
Choose the appropriate power cable (refer to Table 3.2 above).
OUTPUT and BATTERY CONNECTION
Output-L1: Output Phase L1
Output-L2: Output Phase L2
Output-L3: Output Phase L3
Output-N: Output Neutral
GND: Grounding
BAT+: Positive terminal of the batteries string
BATN: Neutral terminal of the batteries string
BAT-: Negative terminal of the batteries string
30