Switching The Flash Unit On And Off - Metz MECABLITZ 20 C-2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
• Slide the battery compartment cover in the
direction of the arrow and fold open.
• Insert the batteries lengthwise in conformity
with the indicated battery symbols and close
the battery compartment cover.
When loading batteries ensure correct
polarity, as indicated by the symbols in the
battery compartment. Mixed up battery
poles may destroy the flash unit! Replace
k
all batteries at a time and make sure that
the batteries are of the same brand and
type and have the same capacity!
Exhausted batteries must not be thrown in
the dustbin! Help protect the environment
and dispose of run-down batteries at the
66
appropriate collecting points.

3.3 Switching the flash unit on and off

The flash unit is switched on and off by its
main switch.
Switch positions
„M"
Manual flash mode with full light
output, see Section 6.2.
„2,8"
Automatic flash mode with auto
aperture f2.8 at ISO 100, see
Section 6.1.
„5,6"
Automatic flash mode with auto
aperture f5.6 at ISO 100, see
Section 6.1.
Slide the main switch to "OFF" to switch off the
flash unit.

Publicité

Table des Matières
loading

Table des Matières