Technical Specifications - MetaSystem Meta EasyCan EVO Digital Instructions De Montage

GENERAL SPECIFICATIONS
Power supply:
Alarm control unit consumption:
Working temperature:
Immunity time:
Alarm arrows blinking:
Alarm cycle duration:
Alarm cycles for the different stimulations:
PROTECTIONS
Volumetric Protection:
Alarm input from auxiliary modules:
Absorption sensor:
Perimeter Protections:
Ignition Lock Relay:
Protection against ignition attempt:
Anti-Carjack:
Automatic activation of the alarm:
SERVICES AND COMMANDS CAPACITY
Horn/Pager relay alarm output
Blinker output command
Blinker push button control output
Power window module output command
Emergency deactivation
Flashing LED
Doors open when activated warning:
Line for the hybrid module M327:
US inhibition protection for heater:
Garage function:
Car-Finder function:
COMBINABLE SIRENS
Piezoelectric siren M03
Self-powered code siren M05
Self-powered RADIO siren WFR
DISCONNECT THE CAR BATTERY
Fig. 1
CHOICE OF PRODUCT AND CAN-BUS PROTOCOL UPDATE
To identify the most suitable product for the specifi c vehicle and have at disposal an updated list of the CAN-BUS
protocols available for the Meta EasyCan EVO Digital product, refer to the product/vehicle list in the technical area of
website www.metasystem.it. To enter the new CAN-BUS protocols needed for vehicle application, or existing CAN-BUS
protocol updates in the Meta EasyCan EVO Digital product the programmer PRG007 must be used and it's user instruction
and software application to download on computer are availables in the technical area of website www.metasystem.it.
The protocols for updating the Meta EasyCan EVO Digital product are included in the PRG007 Programmer software
application and to obtain the new protocols must be download the new software version from the technical area of the
website www.metasystem.it. The Meta EasyCan EVO Digital product is supplied with a factory set-up which permits the
automatic recognition of all the CAN-BUS protocols of the Volkswagen Group (VW autosearch). The CAN BUS protocols
inside the Digital module can be selected by means of the programmer PRG007 using the Meta EasyCan dedicated wiring
(code: ABS13720) and following the indications available in the technical area of the website www.metasystem.it.
To select the right type of activation/deactivation commands for your car and
to quickly and eff ectively customise the alarm control unit, we suggest reading
the car's technical data sheets which you will fi nd at www.metasystem.it and
then you will have all the instructions for installing quickly and correctly. To
customise the operating modes, use the PRG007 Programmer or the portable
PDC/CAR ALARM PROGRAMMER which will give you access to functions that
cannot be programmed manually. The update of the programmer's software,
and infomation about programmable functions are available ONLINE on website
www.metasystem.it , into tech area "CAR-ALARM".

TECHNICAL SPECIFICATIONS

PRODUCT SET-UP
12Vdc (10V-15V)
Deactivated < 1,5mA - Activated < 5mA
-40°C +85°C
25 seconds
0.4 sec. ON; 0.4 sec. OFF
25 sec.
95/56/EC (European standards)
Eco/Doppler ultrasound system with 2 levels of sensitivity, can be disabled.
Positive input, can be disabled
Protection that can be activated
3 separate inputs to protect doors, boot and bonnet
10A internal relay with 2 contacts available (C-NC)
It disables ignition with alarm activated and triggers a siren alarm
Protection that can be activated
2 selectable modes (activating just the ignition lock or all)
Electronic negative command Max 1A
Electronic positive command Max 5A+5A
Electronic command with negative polarity Max 1A
Timed electronic command with selectable polarity
Push button/LED or Electronic keys (Max 4)
It indicates that it displays the alarm status and alarm memories
It indicates if a door, the boot or bonnet is open when the alarm is activated.
Bus line preset for using the centralised locking control module M327
It automatically disables the US protection when the heater is switched on
It disables self-activation, making car maintenance easier
Selectable using OPT M327
Sound level 114 dB not self-powered
Sound level 116 dB self-powered
Sound level 116 dB self-powered/Freq.869.85 Mhz
ASSEMBLE THE SIREN IN THE ENGINE COMPARTMENT
80°C
12
H O
2
PRG007 PROGRAMMER
MetaSystem code: ABS15090
HARNESS FOR Meta EasyCan
MetaSystem code: ABS13720