Technical Data, Markings - ALFRA TMH 50 Mode D'emploi

TecHnicAL dATA
Prod.-No.:
Designation
Pull-off strength
Max. load-bearing capacity:
(on flat material
with safety factor >1:3)
Max. load-bearing capacity:
(at 90° inclination of the load
with safety factor >1:3)
Dead weight of the unit
Storage temperature
Operating temperature
MARKings On THe HAnd-OpeRATed LiFTing MAgneT
Detailed descriptions for handling and operating conditions of the TMH 50 can be found on the upper side
of the lifting magnet. This labeling must not be modified, damaged or removed. Otherwise the manufacturer
cannot be held responsible for any personal injuries, property damage or accidents resulting from this fact.
New labels must be ordered from the manufacturer if necessary.
Prod.-No.189414231
41100.H
TMH 50 Hand-operated lifting magnet
>300 kg from 6 mm S235
50 kg from 3 mm S235
35 kg from 3 mm S235
1,6 kg
-30°C to +60°C
-30°C to +60°C
>660 lbs from 0.25"
110 lbs from 0.12"
75 lbs from 0.12"
3,6 lbs
-22°F to +140°F
-22°F to +140°F
13