Titrationstand Tm 235 Kf - Xylem TitroLine 7500 KF Mode D'emploi

106

Titrationstand TM 235 KF

1.3.2
Translation of the legally binding German version
In connection with the titrator TitroLine
EMC compatibility according to the Council Directive: 2014/30/EU;
applied harmonized standards: EN 61326 Part 1: 2013
Low-voltage directive according to the Council Directive 2014/35/EU;
Testing basis EN 61 010-1: 2010 for laboratory equipment
RoHS Council Directive 2011/65/EU
FCC Part 15B and ICES 003
Country of origin: Made in Germany
Pump: Free volume flow- air:
Delivery pressure max.:
Flow rate liquid medium:
Stirring speed: 50 ... 1000 U/min
Hoses: PVC- hose (outer diameter 6 x 1 mm)
PTFE- hose (outer diameter 4 x 0.5 mm)
Connections
Low voltage input 12 V /  on the backside of titration stand
Power supply:
Plug connection: plug for low voltage connection – phone jack-,
Positive pole at pin contact, inside contact  = 2.1 mm, USA/Japan,
Power supply via titrator TitroLine
Housing:
Material: Polypropylene, polyester coated
Dimensions: 80 x 130 x 250 mm (W x H x D), height without stand
Weight: 1.0 kg
Ambient conditions:
Ambient temperature: + 10 ... + 40 °C for operation and storage
Humidity according to EN 61 010, Part 1:
Max. relative humidity 80 % for temperatures up to 31 °C,
linear decrease down to 50 % relative humidity at a temperature of 40 °C
®
7500 KF
Do not used in hazardous locations!
flow rate 2.25 l / min
1,5 bar
approx. 0,8 l / min
®
7500 KF
(Release: 21. February 2020)