Technical Specifications Of The Titrator Titroline; Notes To The Operating Manual; Intended Use; 7500 Kf - Xylem TitroLine 7500 KF Mode D'emploi

1

Technical Specifications of the Titrator TitroLine

1.1

Notes to the operating manual

The provided operating manual will allow you the proper and safe handling of the product. For maximum security,
observe the safety and warning instructions in the operating manual!
Warning of a general danger:
Non-compliance results (can result) in injury or material damage.
Important information for device use.
 Refers to another part of the operating manual.
The menu screens shown in this operating manual serve as an example and may differ from what you see!
1.2

Intended Use

®
The TitroLine 7500 KF is a potentiometric titrator and suitable for volumetric KF- and Dead-Stop- titrations with a
maximum of 50 memorisable methods.
The examples of possible use include:

KF titrations with 1-component KF reagents

KF titrations with 2-component KF reagents

Dead stop titrations such a bromine number and sulphur dioxide

Compatibility with TitriSoft from Version 3.3
In addition, the TitroLine

Dosing

Preparation of solutions
Each method allows for the setting of a variety of dosing and filling rates.
Solutions to be used:
Virtually, any liquids and solutions with a viscosity of < = 10 mm²/s such as concentrated sulphuric acid may be
used.
However, one has to avoid the use of chemicals that may attack glass, PTFE or FEP or that are explosive,
such as hydrofluoric acid, sodium azide or bromine! Suspensions containing high solids percentages may clog or
even damage the dosing system.
General:
The safety guidelines that are applicable to the handling of chemicals have to be observed under all
circumstances. This applies in particular to inflammable and/or etching liquids.
®
7500 KF comes with the functionalities of the TITRONIC
®

7500 KF

®
500 piston burette:
103