RS Pro RS-960 Manuel D'instructions page 8

True RMS Compact Digital Multimeter / English
Enclosure Double molded
Shock (Drop Test) 6.5 feet (2 meters)
Diode Test Test current of 1.5 mA maximum, open circuit voltage 3V DC typical
Continuity Check Audible signal will sound if the resistance is less than 50Ω (approx.),
test current <0.35mA
Temperature Sensor Requires type K thermocouple
Input Impedance >10MΩ VDC & >10MΩ VAC
AC Response TRMS
ACV Bandwidth 50/60HZ(ALL WAVE) 45Hz to 1000Hz(SINE WAVE)
Crest Factor ≤3 at full scale up to 300V, decreasing linearly to ≤1.5 at 600V
Display 4,000 counts Positive Display
Overrange indication "OL" is displayed
Auto Power Off 15 minutes (approximately) with disable feature
Polarity Automatic (no indication for positive); Minus (-) sign for negative
Measurement Rate 3 times per second, nominal
Low Battery Indication " " is displayed if battery voltage drops below operating voltage
Battery
1.5V AAA * 2 battery
Fuses
mA, µA ranges; 0.5A 600V ceramic fast blow A range;
10A/600V ceramic fast blow
Operating Temperature 41oF to 104oF (5oC to 40oC)
Storage Temperature -4oF to 140oF (-20oC to 60oC)
Operating Humidity Max 80% up to 87oF (31oC) decreasing linearly to 50% at 104oF
(40oC)
Storage Humidity <80%
Operating Altitude 7000ft. (2000meters) maximum.
Weight 0.753lb (342g) (includes holster).
Size (182 x 82 x 59mm) (includes holster)
Safety This meter is intended for origin of installation use and protected,
against the users, by double insulation per EN61010-1 and IEC61010-1
2nd Edition (2001) to Category III 600V and Category II 1000V;
Pollution Degree 2. The meter also meets UL 61010-1, 2nd Edition
(2004), CAN/CSA C22.2 No. 61010-1 2nd Edition (2004), and UL
61010B-2-031, 1st Edition (2003)
12
Manuel d'instructions
RS-960
No d'inventaire: 146-9085
Multimètre numérique compact True RMS
FR
22/11/2017 Version No.001