TEMPUR-PEDIC ACTIVEbreeze ERGO EXTEND Manuel Du Propriétaire page 4

safety precautions and usage statements
Power Ratings:
INPUT: AC 100–240V 50/60 HZ 2.0A
OUTPUT: DC 29V 2.0A
WATTS: 58W
Product Ratings:
The lift motors are not designed to operate continuously for more
than two [2] minutes in an eighteen [18] minute time period or
approximately 10% duty cycle. Attempting to circumvent or exceed
this rating will shorten the life expectancy of the product and may
void the warranty.
The massage motors are not designed to operate continuously for
more than 30 minutes at a time. Please allow the massaging system
to rest for 30 minutes after automatic massage shut off before
restarting.
The fans are not designed to operate continuously for more than
600 minutes (10 hours). Please allow the fan system to rest for at
least 60 minutes after automatic fan shut off before restarting.
Weight Limits:
The recommended weight limits on the TEMPUR-PEDIC
ACTIVEbreeze° ERGO EXTEND
Twin Long /Split CA King / Queen: 850 pounds.
Maximum weight the bed can support per person is 350 pounds
with the weight evenly distributed across the head and foot
sections. This product is not designed to support or lift this amount
of weight in the head or foot sections alone. NOTE: Exceeding the
recommended weight restrictions could damage your TEMPUR-
2
All manuals and user guides at all-guides.com
are:
TM
PEDIC ACTIVEbreeze° ERGO EXTEND
best performance, you should enter and exit the TEMPUR-PEDIC
ACTIVEbreeze° ERGO EXTEND
position.
TEMPUR-PEDIC ACTIVEbreeze° ERGO EXTEND
bed frames, furniture beds and platform beds that are certified
to hold a minimum of 1000 pounds. If using this adjustable base
without the legs and placing directly on a bed frame or platform
bed, cross-bed supports (slats) are strongly recommended to
ensure TEMPUR-PEDIC ACTIVEbreeze° ERGO EXTEND
stability during operation.
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.
Acoustics:
In normal base operation the wheels, which allow the bed to maintain
its distance from the wall, will make contact with the steel platform
supports of the base creating a contact noise. When entering, exiting
or shifting weight on the base, this contact noise may be audible as
the wheels make contact. This is normal.
In normal operation of the Activebreeze system, fan noise from the
system can be expected especially at higher speeds. When entering,
exiting, shifting weight or articulating the base, fan noise may change
slightly due to change of position. This is normal.
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight
whenever possible. For spot cleaning, wipe area with a light damp
sponge or vacuum with a soft brush attachment to remove particles.
Keep at a minimum of 30cm (12 inches) away from direct heat
and void your warranty. For
TM
while it is in the flat or fully lowered
TM
fits easily inside
TM
maintains
TM