Safety Instructions - IKRA GESI 1000 Manuel D'utilisation

Débroussailleuse électrique
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
switched on or off any more is dangerous
and must be repaired.
c) Pull the mains plug out of the socket
before you adjust a tool, change acces-
sories or put the tool aside. This precau-
tion avoids the unintentional start of the tool.
d) Store power tools out of the reach of
children. Do not allow persons to use
the tool if they are not familiar with the
tool or these instructions. Power tools
are dangerous if used by inexperienced
persons.
e) Thoroughly maintain your power tool.
Check whether moving parts are working
properly and are not jamming/sticking,
and whether parts are broken or other-
wise damaged in a way that affects the
function of the tool. Have damaged parts
repaired before using the tool. Many ac-
cidents are the result of poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Thor-
oughly looked-after cutting tools with sharp
cutting edges are jamming less often and
are easier to guide.
g) Use power tools, accessories, add-on
tools, etc. in accordance with these in-
structions and in the way prescribed for
the respective type of tool. You should
also consider the working conditions
and the work to be carried out. The use
of power tools for purposes other than those
intended for the respective tool may result in
dangerous situations.
5) Service
a) Have the power tool serviced by quali-
fied technical personnel only; repairs
should be carried out using exclusively
original spare parts. This will ensure the
safe operation of the power tool.

6. Safety Instructions

A. General Instructions
1. Your electric tool is a high-speed, fast-cut-
ting power tool. The electrical connection
and cutting tool are potential sources of
danger. Therefore, special safety precau-
tions must be observed to reduce the risk
of personal injury.
2. Always switch off the tool and disconnect
the plug from the power supply before
GB | Operating Instructions
3. Have your dealer or a specialist show you
4. Minors should never be allowed to use
5. The user is responsible for safety for all
6. Never allow children or people unfamiliar
7. Only use the machine in daylight or good
8. Before use the machine and after any im-
9. Never operate the machine with damaged
10. You must be fit to operate an electric
11. Never attempt to modify your tool. This
12. Do not use the tool if other persons,
13. The high-speed cutting head may catch
B. Operational Precautions
14. Only use your lawn trimmerfor cutting
C. Instructions regarding to safe handling
15. A power circuit breaker must be installed
GB-6
carrying out any maintenance or repair
work on the unit. Always unplug the tool if
you leave it without supervision.
how to operate your tool.
an electric lawn trimmer. Never lend or
rent your electric lawn trimmer without
these operating instructions. Be sure that
anyone using your tool understands the
information contained in these operating
instructions.
persons in the working area of the device.
with the instruction to use the machine
artificial light.
pact, check for signs of wear or damage
and repair as necessary
guards or without the guards in place.
lawn trimmer- rested, healthy and in good
physical condition. If you get tired while
operating your scythe, take a break. Never
work with an electric lawn trimmerwhile
under the influence of alcohol or drugs.
excludes all liability for personal injury or
damage to property caused by improper
use or impermissible modification.
above all children, or animals are near the
working area.
and fling stones and other foreign objects
a great distance. To reduce the risk of in-
jury, ensure that bystanders / children and
animals are at least 15 m (50 ft) away from
your own position.
grass and weeds next to walls, under
fences, around trees and posts, on steps,
garden paths and patios, under bushes
and hedges, on steep slopes, in gaps be-
tween paving stones, etc.

Publicité

Table des Matières
loading

Table des Matières