KCI V.A.C.VIA Manuel D'instructions page 15

d. If 3M™ Cavilon™ No Sting Barrier Film is applied to area with skin folds or other skin-to-skin
contact, make sure that skin-contact areas are separated to allow the film to thoroughly dry
before returning to normal position.
•
Allow 3M™ Cavilon™ No Sting Barrier Film to thoroughly dry before covering with
dressings.
•
Reapplication of 3M™ Cavilon™ No Sting Barrier Film is necessary each time
dressings are changed; the barrier film is removed by the V.A.C.® Advanced Drape
adhesive.
e. If desired, the film can be removed by using most medical adhesive removers as directed.
Clean and dry the involved area and reapply 3M™ Cavilon™ No Sting Barrier Film.
5. Ensure adequate hemostasis has been achieved (refer to Warnings, Bleeding section,
Hemostasis, Anticoagulants and Platelet Aggregation Inhibitors).
6. Protect sensitive structures, vessels and organs (refer to Warnings, Bleeding section, Protect
Vessels and Organs).
7. Sharp edges or bone fragments must be eliminated from wound area or covered (refer to
Warnings, Bleeding section, Sharp Edges).
15