Setting Flash Time; Setting Ringer Volume; Lcd Brightness Adjustment; Call Log Information - Geemarc DALLAS20 Mode D'emploi

Table des Matières

Les langues disponibles

PHONE'S SETTING / CALL LOG INFORMATION

alarm will be cancelled automatically.

SETTING FLASH TIME

When in the setting menu, go to the "SET 6 FLASH" sub-menu and

press the

key.

The display reads "FLASH 4 1000". There are 4 flash time groups

that can be selected depending on the country you are located in.

Please select 110 for the UK, 300 for France, 600 for the US or 1000

when applicable. Use the arrow keys

appropriate group and press the

Using the switch button located on the back of the telephone, you can

set the volume of the ringer to either "Hi" for High, "Lo" for Low or "Off"

to stop according to your preferences.

Press the

key to increase or decrease the contrast on the

display. There are 5 levels of intensity to choose from. You go from

one level to the next by pressing once on the

5, pressing once the

level 4.

The telephone will ring each time there is an incoming call.

If you have subscribed to your provider's Caller ID services, the

key to confirm.

key decreases the intensity back to the

and

to select the

key. When on level

Table des Matières